A machine shop can cut a 316 stainless bracket to ±0.01 mm on Tuesday and still not be allowed to ship it to a defense prime. Defense work is gated by certificates, traceability, and controlled process documentation, not by the quality of the chip. The gates look like paperwork to a general machine shop, and they look like survival to a prime contractor who can be de-listed for shipping an untraceable part. This article covers the certifications buyers look for, the documents that ride with each part, and the operational habits that separate a defense-capable shop from a shop that merely wants to be one.
The baseline: ISO 9001 is table stakes
ISO 9001:2015 is the floor. It certifies that the shop controls documents, calibrates gauges, handles nonconforming parts, and trains operators. It does not certify any single part. For defense primes, ISO 9001 is the minimum a shop needs to be on the approved vendor list at all, and many primes will not even send a drawing to a shop without it. Verify the certificate number and the accreditation body on the registrar’s web site; a laminated PDF on a sales page proves nothing. Certificates expire and get suspended, and a shop operating on a lapsed certificate is a shop you do not want on your program. The ISO 9001:2015 requirements overview lists the clauses that show up during an audit.
The aerospace overlay: AS9100
AS9100 is ISO 9001 plus about 50 additional clauses written for aviation, space, and defense. It adds traceability down to the heat of material, control of special processes such as heat treat, plating and NDT, configuration management, and a corrective-action system that primes can audit. Most defense hardware flowing through a prime or tier-1 supplier requires the machine shop to hold AS9100, and some programs require NADCAP accreditation on top for special processes such as NDT or heat treat. AS9100D is the current revision. If the shop only holds ISO 9001, they can build parts, but they cannot be the documented source on a defense drawing. The AS9100 versus ISO 9001 guide explains the gap in plain terms.
Traceability and the part pedigree
Defense parts carry a paper trail from mill to ship. The chain starts with a material certificate to EN 10204 3.1 or equivalent, tied to a heat number on the raw bar. The bar heat number is marked on the part or on its tag. The part follows a traveler that records every operation, machine, operator, gauge, and inspection result. First Article Inspection, usually to AS9102, captures every dimension on the drawing with measurement method and actual reading. When the part ships, the packet includes the FAI, the material cert, the inspection report, and any special-process certificates from the plater or heat treater. Lose the chain at any link and the part is scrap, even if it measures perfect. Our guide to CNC machining defense and aerospace parts walks the same chain on a typical bracket.
Security, ITAR, and export control
Defense work has a gate that ordinary machining does not: export control. Parts on the US Munitions List or ITAR-controlled technical data cannot be sent to shops in restricted countries, and the shop needs to register with the relevant authority, screen employees, and control drawings under NDA. For overseas buyers sourcing from China or elsewhere, this is the question that ends the conversation: if the part is on the USML, a non-US shop cannot touch the technical data without an export license. Even when ITAR does not apply, primes expect NDA control, badge access, and drawing-number-level document control. The NDA for custom parts guide covers the paperwork side.
What to ask before you send the drawing
Five questions sort defense-capable shops from hopeful ones. Ask for the AS9100 certificate number and the registrar, and check the scope on the certificate: a shop can hold AS9100 for a product line that excludes your part. Ask for a sample FAI packet, redacted, so you can see how they actually document a part. Ask about their internal gauge calibration system; primes audit this first. Ask about their ITAR or export-control posture up front, because finding out after the quote is wasted time. And ask what their nonconforming-part process looks like: a defense shop isolates, writes an NCR, and notifies the customer before disposition. A general shop reworks quietly and ships. The aerospace quality standards buyer guide covers the audit side in more detail. A shop that treats these gates as routine, not as a burden, will quote you straight, document every shipment, and raise a hand when a feature is out of process capability. That is the shop you want on a multi-year defense program, where a single undocumented part can stop a whole line and cost far more than the quote ever saved.
