What to Include in Your CNC Parts Order: A Checklist

The difference between a CNC shop that quotes your part correctly in two hours and one that comes back with questions, revisions, and a re-quote usually comes down to one thing: how complete your order packet is. A buyer who sends a clean set of files gets a firm price and a realistic lead time. A buyer who sends a STEP file and a wish gets three-day email chains and a quote that changes on the second round. This checklist covers what every order packet should carry, in the order it matters most.

The drawing and the CAD model

Send both: a 3D model and a 2D drawing. The model drives the toolpath; the drawing carries the dimensions, tolerances, and notes the model cannot. PDF is the safe format for the drawing because it prints and measures the same on every screen. For the model, STEP AP214 or AP242 beats IGES, because STEP carries the solid body cleanly without the surface gaps that trigger program errors. Mark the revision on both, and make sure the revision matches — a drawing that says Rev C while the model says Rev B is a classic way to get the wrong part. If you only have a model and no drawing, say so and let the shop define the default tolerances rather than guessing. Our CAD file format guide explains the trade-offs between STEP and IGES in detail.

Material, finish, and traceability

Name the material by alloy and temper, not just by “aluminum” or “stainless”. 6061-T6 and 6061-O machine and price differently, and 303 is not interchangeable with 304. State whether you need a mill certificate (EN 10204 3.1) traced to the heat, because that adds cost and lead time and is pointless on a bracket nobody measures. For the finish, be specific: “anodize clear, Type II, 10-15 micrometers” quotes cleanly; “looks nice” does not. List which surfaces are cosmetic and which are functional, so the shop knows where finish matters. Skip the finish entirely if you want raw parts, and say “as-machined” so nobody adds a process you did not want.

Tolerances and the inspection plan

Call out the critical dimensions with real numbers. Leaving the whole part at the shop’s default is fine if the part is non-critical, but if a bore must mate with a bearing, that bore needs a tolerance on the drawing. State which surfaces need CMM inspection versus a simple caliper check, and whether you want a first-article report. Inspecting every dimension on every part is the fastest way to triple the unit cost; inspect the three that actually carry the assembly. If you have a GD&T callout you are unsure about, circle it and ask the shop to confirm it is measurable before they quote. The drawing checklist we put together lists every block a finished drawing should have.

Quantity, schedule, and logistics

Three numbers drive the price more than any feature: quantity, delivery date, and shipping destination. Put the batch size in the order — one, ten, or five hundred changes the setup-to-piece ratio dramatically. Give a real deadline, and mark whether it is a hard date or a target. Tell the shop where the parts ship to, because export packing, documentation, and Incoterms all affect the quote. If the part will go through anodizing or plating, confirm who sends it — some shops coordinate outside processes and others hand raw parts back to you. The RFQ checklist distills this into a one-page send sheet, and the first-order guide walks a new buyer through the whole flow from inquiry to delivery.

The bottom line

You do not need an engineering degree to put a clean order together. You need a matching model and drawing, a named material and finish, the critical tolerances, and honest numbers on quantity and date. The five minutes it takes to fill those gaps is paid back in the first quote, because a complete RFQ gets a firm price instead of a range, and a firm price is what lets you compare suppliers fairly. When in doubt, add a note saying what the part does and how it assembles. That one sentence tells the machinist which dimensions matter, and it is the cheapest design review you will ever run. One more thing buyers forget: the contact. Put a named person, an email, and a phone on the order so the shop knows who to call when the first article raises a question. A quote that sits unanswered for two days waits in queue behind shops that responded the same morning. If you ship internationally, state the Incoterm — FOB the factory or DDP your door — because who pays freight, insurance, and duty shifts the landed cost by 10 to 20 percent. And if you expect repeat orders, say so at the RFQ. A shop that knows the part will run ten times a year builds the fixture and program once, and the savings flow back into every reorder.

⚙

Ready to Start Your CNC Project?

Get a free quote within 24 hours. ISO 9001 certified, 20+ years experience, low-volume friendly from 1 piece.

Get a Quote